Channel mixer is mainly constituted by three parts of the drum, swing frame rack. Tongzhuang swing rack by two gear wheels and its axial position supported by four wheel, four support rollers, two of the driving wheel with rotating power system to drag the cylinder rotate; pendulum swing frame by a group of crank institutions to drive, crank swing link mechanism is mounted to the frame, swing-bearing components supported on the frame.
Trough mixer characteristics: Trough mixer drum can be simultaneously two rotation, a rotation of the drum, and the other for the drum with the swing of the swing frame, are mixed material in the transfer tube with the drum rotation, flip, mixed with the drum and swing back and forth about the mixing movement of material in a short period of time, under the combined effect of these two movements, fully mixed. Channel mixer suitable for mixing of powder, granular materials.
Using channel mixer sinter mixture to make small balls, and effective measures to improve the mixing permeability increase sintering machine production, improve the quality of sinter, lower sintering energy consumption. Trough mixer made small ball principle is to mix into a ball rolling in the mixer. Small balls of the mixture in the channel mixer scrolling on the one hand into a ball the other hand into a ball to be subjected to the mixture in the mixer scrolling impact damage, the rolling friction destruction, Paola beat destruction. Mixer process parameters, liner design is unreasonable, mix in the mixer not only scroll slide along unloading drop. Sliding of the mix in the mixer, be discharged upon the process can not be made the ball, and the ball has damaging effects on the mix. The mixer optimization design is around the mix in the mixer scrolling away how to extend, to reduce the impact of small balls of the mixture in the mixer, friction, sliding and dumping of loading. |
Groove Mixer production characteristics and the formation of the mixing process